Guangzhou Felicity Solar Technology Co., Ltd.
سعر التجزئة المقترح من المصنع (MSRP) من $215 / الوحدة
التكنولوجيا: MPPT
ضمان المنتج: 2 سنوات
المنطقة: الصين الصين
ملحوظة: سيتم إرسال استفسارك مباشرة إلىGuangzhou Felicity Solar Technology Co., Ltd..


·Peak conversion efficiency of 98%, several seconds tracking speed.
·Adopting temperature compensation , improving the battery lifetime.
·Electronic Protection: over charging, over discharging, overload, short circuit.
·PV Modules or Battery Polarity Reverse Connect Protection: any combination of solar module and battery, without causing damage to any component.

خصائص المنتج

رقم النمودج
800 / 1600 / 2400 / 3200 W
السعر (سعر التجزئة المقترح من المصنع (MSRP))
$215 / الوحدة
البيانات الكهربائية  
الحد الأقصى لمدخل الطاقة الشمسية
800 / 1600 / 2400 / 3200 W
الجهد عند الحد الأقصى لمدخل الطاقة الشمسية
12 / 24 / 36 / 48 VDC
الحد الأقصى لجهد الدائرة الكهربائية المقتوحة للوحة الطاقة الشمسية
145 V
جهد النظام التقديري ‏(البطارية)
12 / 24 / 36 / 48 V
الحد الأقصى لتيار شحن البطارية
60 A
ذروة كفاءة التحويل
98.00 %
بيانات عامة  
الأبعاد ‏(H/W/D)
167.6x257.1x82.9 mm
3.00 Kg
زيادة جهد الشحن
41.1 / 54.8 V
جهد طفو الشحن
42.9 / 57.2 V
نوع البطارية GEL
مراحل الشحن كتلة, امتصاص, طفو
فئة الحماية IP 20
نطاق درجة حرارة التشغيل -20 ~ +45 °C
رطوبة 0 - 90 %
أقصى ارتفاع 3000 m
العرض LCD
اللغة الإنجليزية
جهاز استشعار الحرارة نعم
وضع التبريد مروحة
ميزات الحماية  
ميزات الحماية حماية الدارة القصيرة, حماية ضد التقاطب العكسي للوحة الطاقة الشمسية, حماية البطارية ضد انعكاس القطبية, حماية ضد الحمل الزائد, حماية من الشحن المفرط, حماية من التفريغ المقرط
Product Introduction

Brief introduction

A MPPT( Maximum Power Point Tracking ), or maximum power point tracker is an electronic DC to DC converter that optimizes the match between the solar array (PV panels), and the battery bank or utility grid. To put it simply, they convert a higher voltage DC output from solar panels (and a few wind generators) down to the lower voltage needed to charge batteries.

Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 20% and potentially decrease the power of solar array needed. 

Details Show


·Advanced maximum power point tracking technology to optimize using the solar system.

·Excellent thermal design and nature air cooling.

·Peak conversion efficiency of 98%, several seconds tracking speed. 

·Adopting temperature compensation , improving the battery lifetime.

·Electronic Protection: over charging, over discharging, overload, short circuit.

·PV Modules or Battery Polarity Reverse Connect Protection: any combination of solar module and battery, without causing damage to any component. 

Product Parameters
Rated Current
Default Battery System Voltage
12V/24V/36V/48V DC(Auto Detection)
PV Open Circuit Voltage
Operational max=145VDC temperature corrected VOC
PV Array MPPT Voltage Range
Max PV Input Power(12V)
Max PV Input Power(24V)
Max PV Input Power(36V)
Max PV Input Power(48V)
Storage Battery Voltage
Nominal Voltage
Absorption Voltage
Refloat Voltage
Float Voltage
low Voltage Protection Point
LED indication
Systematic operation,LV indication,LV protection, over charge protection, loads protection, short circuit protection
LCD display
Charge voltage, charge circuit, voltage of storage battery,capacity of storage battery, output current.
Peak Conversion efficiency

Our Advantages

Our R&D department always concentrate on making the best products for our clients. It makes Felicitysolar always lead the solar business in the market.

Direction Manual

Connection Diagram

Installation Procedure:

Step 1, Choose Mounting Location

Install the Charge Controller in an upright position out of direct sunlight, high temperature, and water.
Step 2, Check for Clearance
Place the mppt controller in the location where it will be mounted. Verify that there is sufficient room to run wires and that there is sufficient room above and below the controller for air flow.

Step 3, Mark Holes
Use a pencil or pen to mark the four mounting hole locations on the wall (mounting surface)
Step 4, Drill Holes
Remove the Charge Controller and drill four size able holes in the marked location.
Step 5, Secure Controller
Insert all W 5/ 16-18 sheet metal screw through each hole and tighten against the wall.

Application Cases


Product quality and reasonable price are always the base of our development. We have IEC Certificate and a completed quality control system. Our team continuously improve the service, delivery, and other works to build a win-win cooperation with our customers.


Size: 317*140*240mm       0.01CBM    3.2KG


Q: How many charging mode does the controller have?

A: There are two charging modes. There are PWM and MPPT. MPPT is the most advanced. Felicity have already developed MTTP charge controller with high performance, reliability, efficiency and fast tracking speed.

Q: What's the difference of the PWM charge controller and MPPT charge controller?

A: 1. MPPT controller uses maximum power tracking technology, compared to the PWM controller, the MPPT can generate more electricity with the same solar panels.

     2. MPPT controller has low requirement of solar power system voltage, if the line or component parts damage the voltage, using MPPT controller does not affect the system generating. 

     3. MPPT controller can detect the temperature of the battery, then adjust the temperature by itself, the solar panel can  charge the battery more efficiency.

Q: Why should the controller have temperature compensation function?
A:  As temperature rises, electrochemical activity in the battery increases. Similarly, as temperature falls, electrochemical activity decreases. Therefore, as temperature rises, charging voltage should be reduced to prevent overcharge, as temperature falls, charging voltage should be increase to avoid undercharge. In general, to assure optimum service life, use of a temperature compensated charger is recommended.

Q: How does your factory carry out quality control?
A: Quality is our priority. Our QC always attached great importance to quality control from the very beginning to the end of the production. Each product will be fully assembled and carefully tested before packed.

Q: What is the warranty for MPPT Charge Controller FL-CSM6048?

A: For the charge controller, we offer 2 year warranty.
Q: What is MOQ for inverter?
A: MOQ is 1 PC or mixed.
Q: What is the terms of payment?
Q: T/T, L/C, Western Union, PayPal or cash; 30% for deposit, the balance 70% before shipment.
Q:What is the delivery time?
A: 3 work day with stock after receiving the payment. No stock, 25 work days after receiving the payment.

Guangzhou Felicity Solar Technology Co., Ltd.

Xinyang Industrial Park, Third Gangpu Road, Nanling County, Taihe Town, Baiyun District, Guangzhou, Guangdong
عدد العاملين: 500
مراسلة هذا المورد
Felicitysolar was found in 2007 possessed deep pockets and the professional ability of technology and had formed many modern solar panel production lines, LED street light production lines and the testing systems for solar power and lighting.

We cooperate with the partners from Australia、Turkey、Singapore、Serbia、Nigeria, etc. And our products have covered more than 50 countries and markets.

جهات اتصال مفيدة

Contact Face

4 مزيد من السلاسل منGuangzhou Felicity Solar Technology Co., Ltd.

  • $205 / الوحدة
  • Chinese suppl...
  • FL-CSK-6048
  • 30A 12/24V au...