Chinese supplier high quality 60A MPPT solar ch...

Guangzhou Felicity Solar Technology Co., Ltd.
التكنولوجيا: MPPT
ضمان المنتج: 2 سنوات
المنطقة: الصين الصين
ملحوظة: سيتم إرسال استفسارك مباشرة إلىGuangzhou Felicity Solar Technology Co., Ltd..

الوصف:

·Peak conversion efficiency of 98%, several seconds tracking speed.
·Adopting temperature compensation , improving the battery lifetime.
·Electronic Protection: over charging, over discharging, overload, short circuit.
·PV Modules or Battery Polarity Reverse Connect Protection: any combination of solar module and battery, without causing damage to any component.

خصائص المنتج

رقم النمودج
FL-CSM-4524
البيانات الكهربائية  
الحد الأقصى لمدخل الطاقة الشمسية
600 / 1200 / 1800 / 2400 W
الجهد عند الحد الأقصى لمدخل الطاقة الشمسية
12 / 24 / 36 / 48 VDC
الحد الأقصى لجهد الدائرة الكهربائية المقتوحة للوحة الطاقة الشمسية
145 V
جهد النظام التقديري ‏(البطارية)
12 / 24 / 36 / 48 V
الحد الأقصى لتيار شحن البطارية
45 A
ذروة كفاءة التحويل
98.00 %
بيانات عامة  
الأبعاد ‏(H/W/D)
167.6x257.1x82.9 mm
الوزن
3.00 Kg
يعادل جهد الشحن
13.5 / 27.0 V
زيادة جهد الشحن
13.7 / 27.4 V
جهد طفو الشحن
14.3 / 28.6 V
نوع البطارية GEL
مراحل الشحن كتلة, امتصاص, طفو
فئة الحماية IP 20
نطاق درجة حرارة التشغيل -20 ~ +45 °C
رطوبة 0 - 90 %
أقصى ارتفاع 3000 m
العرض LCD
اللغة الإنجليزية
جهاز استشعار الحرارة نعم
وضع التبريد مروحة
ميزات الحماية  
ميزات الحماية حماية الدارة القصيرة, حماية ضد التقاطب العكسي للوحة الطاقة الشمسية, حماية البطارية ضد انعكاس القطبية, حماية ضد الحمل الزائد, حماية من الشحن المفرط, حماية من التفريغ المقرط
Product Introduction

Brief introduction

A MPPT( Maximum Power Point Tracking ), or maximum power point tracker is an electronic DC to DC converter that optimizes the match between the solar array (PV panels), and the battery bank or utility grid. To put it simply, they convert a higher voltage DC output from solar panels (and a few wind generators) down to the lower voltage needed to charge batteries.

Compared to conventional PWM controller, MPPT technology increases the charge efficiency up to 20% and potentially decrease the power of solar array needed. 

Details Show

Features

·Advanced maximum power point tracking technology to optimize using the solar system.

·Excellent thermal design and nature air cooling.

·Peak conversion efficiency of 98%, several seconds tracking speed. 

·Adopting temperature compensation , improving the battery lifetime.

·Electronic Protection: over charging, over discharging, overload, short circuit.

·PV Modules or Battery Polarity Reverse Connect Protection: any combination of solar module and battery, without causing damage to any component. 

Product Parameters
Model
FL-CSM-4524
FL-CSM-6048
Rated Current
45A
60A
Default Battery System Voltage
12V/24V/36V/48V DC(Auto Detection)
PV Open Circuit Voltage
Operational max=145VDC temperature corrected VOC
PV Array MPPT Voltage Range
16V-120V/32V-150V/48V-150V/64V-150V
Max PV Input Power(12V)
600W
800W
Max PV Input Power(24V)
1200W
1600W
Max PV Input Power(36V)
1800W
2400W
Max PV Input Power(48V)
2400W
3200W
Storage Battery Voltage
Nominal Voltage
12VDC/24VDC/36VDC/48VDC
Absorption Voltage
13.5VDC/27.0VDC/40.5VDC/54.0VDC
Refloat Voltage
13.7VDC/27.4VDC/41.1VDC/54.8VDC
Float Voltage
14.3VDC/28.6VDC/42.9VDC/57.2VDC
low Voltage Protection Point
10.0VDC/20.0VDC/30VDC/40VDC
Display
LED indication
Systematic operation,LV indication,LV protection, over charge protection, loads protection, short circuit protection
LCD display
Charge voltage, charge circuit, voltage of storage battery,capacity of storage battery, output current.
Peak Conversion efficiency
98%
W*H*D(mm)
167.6*257.1*82.9mm
G.W(KG)
3KG

Our Advantages

Our R&D department always concentrate on making the best products for our clients. It makes Felicitysolar always lead the solar business in the market.

Direction Manual

Connection Diagram

Installation Procedure:

Step 1, Choose Mounting Location

Install the Charge Controller in an upright position out of direct sunlight, high temperature, and water.
Step 2, Check for Clearance
Place the mppt controller in the location where it will be mounted. Verify that there is sufficient room to run wires and that there is sufficient room above and below the controller for air flow.

Step 3, Mark Holes
Use a pencil or pen to mark the four mounting hole locations on the wall (mounting surface)
Step 4, Drill Holes
Remove the Charge Controller and drill four size able holes in the marked location.
Step 5, Secure Controller
Insert all W 5/ 16-18 sheet metal screw through each hole and tighten against the wall.

Application Cases

Guangzhou Felicity Solar Technology Co., Ltd.

Xinyang Industrial Park, Third Gangpu Road, Nanling County, Taihe Town, Baiyun District, Guangzhou, Guangdong
عدد العاملين: 500
مراسلة هذا المورد
Felicitysolar was found in 2007 possessed deep pockets and the professional ability of technology and had formed many modern solar panel production lines, LED street light production lines and the testing systems for solar power and lighting.

We cooperate with the partners from Australia、Turkey、Singapore、Serbia、Nigeria, etc. And our products have covered more than 50 countries and markets.

جهات اتصال مفيدة

Contact Face
Roy

4 مزيد من السلاسل منGuangzhou Felicity Solar Technology Co., Ltd.

  • $205 / الوحدة
    FL-CSL
    MPPT
  • $215 / الوحدة
    FL-CSM-6048
    MPPT
  • FL-CSK-6048
    MPPT
  • 30A 12/24V auto PWM solar charge controller for solar system
    PWM