خلايا شمسية
(484 سلاسل الخلية الشمسية / 5,115 خلايا شمسية فردية)

• High Efficiency N-Type and TOPCon technologies

• Improved passivation and doping for lower power loss

• Ultra-large 210 mm wafers deliver Increased power density

• 16 busbars for better light capture

• Excellent low-light performance

• Very low light-induced degradation

• High weather resistance

● High Conversion Efficiencies Resulting in Superior Power Output Performance

● Outstanding Power Output Even in Low Light or High Temperature Conditions

● Optimized Design for Ease of Soldering and Lamination

● Long-term Stability, Reliability and Performance

● Low Breakage Rate

● Uniform Color

• High Performance N-Type and TOPCon technologies

• Improved passivation and doping minimize power loss

• Ultra-large 210 mm wafers deliver higher power density

• 18 busbars for better light capture

• Excellent low-light performance

• Very low light-induced degradation

• High weather resistance

● Positive power tolerance of 0~3% improves system performance

● Industry leading Module efficiency: Max efficiency 22%

● Tested up to 5400 Pa for Maximum load resistance

● Verified resistance against PID effects

● Progressive Power warranty guarantees 80.2% of rated power at 25 Years

● Manufactured globally with world-class quality standards

• Advanced TOPCon technology for higher efficiency

• Improved passivation and doping reduce power loss

• 16 busbars for better light capture

• Excellent low-light performance

• Very low light-induced degradation (LID)

• High weather resistance and durability

• Stable sealed power output

• High Photoelectric, Conversion Efficiency

• Excellent Resistance to Hidden Cracks

• Higher Power Generation

• Higher Efficiency in Power Generation

• PERC plus SE Technology

• Higher efficiency to reach a maximum of 23.6%

• Uniform color on the front and back sides

• Low Optical Attenuation

• Anti-PID Performance

• Lower Packaging Losses

• the Philippines Cells

• Three choices to chooes：

  Non-UFLPA China Polysilicon+China Ingot/Wafer

  Non-China Polysilicon OCI+China Ingot/Wafer

  Non-China Polysilicon Hemlock+Indonesia Ingot/Wafer

1. PERC+SE Technique

2. Both sides can generate electricity

3. High conversion efficiency, average cell efficiency is 22.3%, highest efficiency is 22.8%

4. Long term efficiency, stability and excellent reliability

5. Low breakage rate and Low LID rate

6. Good color uniformity

1. High conversion efficiencies resulting in superior power output performance

2. Outstanding power output even in low light or high-temperature conditions

3. Optimized design for ease of soldering and lamination

4. Long-term stability, reliability and performance

5. Low breakage rate

6. Uniform color

1. PID Free/PERC

2. High conversion efficiency,average cell efficiency is 22.2%,highest efficiency is 22.7%

3. Excellent solder-ability through high quality

4. Long term efficiency stability and excellent reliability

5. Low breakage rate and Low LID rate

6. Good color uniformity

1. PERC+SE Technique

2. Both sides can generate electricity

3. High conversion efficiency, average cell efficiency is 22.3%, highest efficiency is 22.8%

4. Long term efficiency, stability and excellent reliability

5. Low breakage rate and Low LID rate

6. Good color uniformity

High Efficiency 20%-23%

Wind/Snow Load 2400Pa/5400Pa

Lower temperature coefficient and operating temperature -40~+85°C

0~+5 Power Output Tolerance

Resistant to harsh environments such as salt, ammonia, sand, high temperature and high humidity areas

● High Conversion Efficiencies Resulting in Superior Power Output Performance

● Outstanding Power Output Even in Low Light or High Temperature Conditions

● Optimized Design for Ease of Soldering and Lamination

● Long-term Stability, Reliability and Performance

● Low Breakage Rate

● Uniform Color

• HJT 2.0 Technology

• -0.26%/°C Pmax temperature coefficient

• SMBB design with Half-Cut Technology

• Up to 90% Bifaciality

• Sealing with PIB-based sealant