دليل اللوحة الشمسية
(11,363 سلاسل اللوحات / 41,585 لوحات فردية)

This module series employs a bifacial design that allows power generation by both module surfaces

These modules are well-suited for use in large-scale projects, as well as in BIPV and vertical installations

Half-cut cell design further improves module performance and reliability

The use of high-strength glass on both sides provides greater durability and longer life

1. TUV, VDE, CEC, PI-BERLIN, CE certified panel.

2. ISO 9,001 & ISO 14,001 accredited manufacturing facility.

3. Reliable quality insured by CHUBB INSURANCE.

4. Cost-effective competitiveness.

• 144 half-cut monocrystalline cells

• A conversion efficiency of up to 20.87%

• Equipped with 158.75mm cells, generate up to 420W

• A multi-busbar design with 9 busbars

• Stable power output is ensured by positive power sorting

• A 15 years product warranty and a 30-year linear power warranty

Used advanced laser-cut solar cells with PERC technology

Low iron-tempered glass with enhanced stiffness and good impact resistance

Tempered glass solar module provides a high conversion rate of up to 21%

Large cell size 166x166mm considerably increase power output

Highly resistant to harsh environment and variable temperatures

Aesthetic desgin perfect for rooftop installation.

Advanced module technology deliverys supeior efficiency.

Higher performance under low light environment.

Low PID Mono PERC with Half-cut Technology.

12 years materials warranty/25 years output warranty,

Comply with various criteria for diffrient market and application

Created to deliver lasting efficiency and durable performance for various solar projects - high efficiency of up to 21.5% and output power from 535W to 555W

Equipped with 144 mono half-cut cells

Nuuko's current sorting process further increases system power output by reducing the current mismatch

Long-term performance warranty

Certified by TUV, CE, IEC, INMETRO,RETIE

12 years power output not less than 91.4%

25 years power output not less than 84%

12 years products material process warranty

48 hours quick response service

Low light conditions(cloudy and early morning evening)

Excellent performance

● MBB (Multi Busbar) technology bringing more BOS savings

● High power output

● PID resistant

● Excellent IAM and low light performance

● Severe weather resilience,Resistant to salt, acid and ammonia,Certified to 5,400 Pa positive load and 2,400 Pa negative load

● Durability against extreme environmental conditions

• M10-182*91mm, 580w, 144cells, 22.48%

• Non-destructive cutting, Mono, MBB, N-type, Large size half-cut module

• Powered with N-type half-cut monocrystalline cells

• Output power ranging from 560 to 580 watts

• 25-year linear performance warranty

1) Thermal Cycles

2) Heating

3) UV protection

4) High voltage

5) Hot Spot

6) Impulse Voltage

7) Humidity and Frost

8) Reverse current overload

9) Grounding Performance

10) Impact

1. Higher module conversion efficiency (up to 20.17%) thanks to PERC technology

2. Optimized production process guarantees outstanding PID resistance

3. Advanced glass and cell surface texture design ensure excellent performance in a low-light environment

4. Certified to withstand: wind load (2,400 Pa) and snow load (5,400 Pa)

5. High salt mist and ammonia resistance

High transmissivity, low-iron tempered glass.

Using high efficiency mono solar cells.

Excellent performance in low-light environments.

High quality junction box and connector systems.

100% inspection, to guarantee the reliability of solar systems.

Anti LID & Anti PID.

Lower temperature coeffient.

Quality RFID Tracking.

• 144 half-cut PERC cells offering 21.28% efficiency and up to 550 watts of power

• Half-cut cells significantly increase the performance of the solar panel

• Our panels are strictly tested for their reliability and durability

• We offer a competitive 15-year product and a 30-year linear output warranty

High-performance solar module series that can generate up to 410W of power at 21% efficiency

Our modules employ advanced technologies like the PERC, half-cut, and multi-busbar designs to provide improved performance

Gallium-doped silicon cells protect the module from light-induced degradation

Designed to withstand harsh weather conditions

• Lead manufacturer of crystalline silicon photovoltaic modules

• Automatic production line and world-class technology

• Long-term reliability tests

• 3 EL inspection ensuring defect-free solar modules

• Tested for harsh environments

• Rigorous quality control to meet the international quality standard: ISO9,001;ISO18,001 and ISO45,001