ملحقات التركيب
(225 ملحقات التثبيت الفردية)

• They replace the traditional, cumbersome assembly method of copper-aluminum tube crimping.

• The connector is followed by nut locking, with a quick-installation structure that connects copper and aluminum terminals directly.

• This enables fast and convenient copper-to-aluminum connections in photovoltaic power stations and similar applications.

• The single-axis and dual-row design is more economical and easier to operate and maintain.

• Adaptable to various terrains, with a maximum slope of 20%.

• Using LoRa wireless for data transmission results in a longer transmission distance and a more stable signal.

• It can work with all kinds of trapezoidal metal roof

• It is a rail-less solution, it will help you save some cost and labor costs

• Use anti-aging EPDM rubber to improve the waterproof performance

• Fast installation in under one minute with proprietary welding technology.

• Quad-layer coating resists corrosion, ensuring stable electrical performance for 25 years.

• The potential difference between copper and aluminum accelerates the oxidation process.

• Pre-assembled to address complex connection issues before shipment.

• Flame Retardant: Comply with the CPR Dca standards for reduced fire spread and smoke emission.

• Water Resistant: Possibility of intermittent, partial flooding by water.

• Halogen Free, E-Beam Crosslink XLPO, AD8 Direct Burial Optional, Anti-Termite.

• The SK4 Solar Connectors are TÜV Certified.

• It is low-smoke and halogen-free, making it suitable for various solar power applications.

• The cable effectively reduces the failure rate and operational costs of photovoltaic systems in the long term.

• UV-resistant, radial humidity-resistant, flame-retardant, low-voltage cable.

• Especially suited for outdoor applications due to the very robust outer sheath.

• TÜV Rheinland 2PfG2642 /01.22 certified for protected, steel tape-armored aluminum cables, suitable for fixed underground installation.

• Fast installation in under one minute with proprietary welding technology.

• Quadruple-layer coating ensures corrosion resistance, lower cost, higher efficiency, and reduced TCO.

• Resistant to high temperatures, cold, and humidity, perfect for harsh conditions. Certified for 25 years of reliable operation.

موصلات التيار المتردد، تستخدم في الغالب في محطة التيار المتردد العاكس، ثلاثة نواة وخمسة نواة لاختيارك، المنتج لديه مقاومة قوية ضد الشيخوخة، ومقاومة للأشعة فوق البنفسجية، بما يتماشى مع متطلبات استخدام الظروف البيئية الخارجية القاسية،

توصيل الكابل باستخدام براغي قفل للتوصيل سهلة الفك (يمكن استخدام المبرشمة والملحومة بدلاً من ذلك)

• High voltage, large current, low resistance, high reliability, and low cost.

• Protection grade up to IP68.

• Certified by TUV and UL.

مفتاح فصل التيار المستمر للوحة الشمسية هو جهاز أمان كهربائي يمكن فصله يدويًا عن وحدات النظام الكهروضوئي.

• E-beam cross-linked compounds

• High resistance against UV, ozone, and hydrolyzation

• High-temperature resistance, materials will not melt or flow

• Flexibility under cold conditions

• Long usable life, expected usable life over 25 years (90°C)

• Applicable to all common connectors

الموصلات الشمسية عبارة عن موصلات كهربائية أحادية التلامس تُستخدم عادةً لتوصيل الألواح الشمسية والتي تسمح ببناء سلاسل من الألواح بسهولة عن طريق دفع الموصلات من الألواح المتجاورة معًا.

• High voltage, large current, low resistance, high reliability, and low cost.

• Protection grade up to IP68.

• Certified by TUV and UL.

• Test up to 1500V / 40A Systems

• Large Display Designed for Reading in Direct Sunlight

• Highest Rated PV Tester on the Market

• Record up to 999 Full Sets of String Data

• Rugged Case Designed for Continuous Site Work

• PV String Open Circuit Voltage Measurement Up To 1500 Vdc

• PV String Short Circuit Current Up To 25 Adc

• Data Transfer – Wireless Updates – Firmware Changes Via The PV: Sync Mobile App

• Internal Memory For Results Storage

• Manual Mode For Diagnostic Testing

• Metal casing with IP65 protection

• Suitable for PV systems under 1000/1500V DC voltage

• Supports one or more outputs

• Easy installation on walls

• Customized design

• They replace the traditional, cumbersome assembly method

• The connector is followed by a quick-installation structure that connects copper and aluminum terminals directly.

• This enables fast and convenient copper-to-aluminum connections in photovoltaic power stations and similar applications.

• Non-polar, bidirectional protection, overload protection, and short circuit protection

• Flame-retardant material, high breaking capacity, short arcing

• For use in DC500V/600V/1000V/1500V photovoltaic systems

• Multiple wiring options, compact size, complete accessories